Parameters - Siemens SINAMICS GL150 Operating And Installation Instructions

Operation

8.1 Parameters

NOTICE
Incorrect parameterization
The drive may malfunction if you change the parameters.
Do not change the parameters, e.g. for the motor circuit-breaker.
Note
To complement these operating instructions, the List Manual contains an overview of all
parameters as well as a selection of function diagrams to describe the operating principle.
8.1 Parameters
The drive is adapted to the relevant drive task by means of parameters. Each parameter is
identified by a unique parameter number and specific attributes. Such attributes are, for
example:
● Readable attributes
● Writable attributes
● BICO attributes
The parameters can be accessed via the following means:
● PC with commissioning tool via PROFIBUS
● Operator panel
Parameter types
The following parameters are available:
● Adjustable parameters (write/read)
● Visualization parameters (read-only)
90
Adjustable parameters directly influence the response of a function, e.g. the ramp-up and
ramp-down time of a ramp-function generator.
Display parameters are used to display internal variables, e.g. the actual motor current.
Figure 8-1 Parameter types
SINAMICS GL150 6SL38503UM114PA0Z
Operating Instructions 04/2017