Step 4: Connecting The Audio Cords - Sony DVP-CX995V Operating Instructions (DVP-CX995V CD/DVD Player) Operating Instructions Manual

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
Stereo amplifier (receiver) and two speakers
MD deck/DAT deck
• Surround effects:
– None
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects:
– Dolby Surround (Pro Logic) (page 89)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 89)
– DTS (5.1 ch) (page 89)
– Super Audio CD Multi channel (page 90)
or
AV amplifier (receiver) with digital input jacks
having a Dolby or DTS** decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 89)
– DTS (5.1 ch) (page 89)
z Hint
If you have an AV amplifier that conforms to the
96 kHz sampling frequency, use connection
20
through
A D
Connection
(page 21)
A
(page 22)
B
(page 23)
C
(page 24)
D
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
. double-D symbol are trademarks of Dolby
D
Laboratories.
** "DTS" and "DTS Digital Surround" are
registered trademarks of Digital Theater
Systems, Inc.
.
Your setup (example)