Step 2: Connecting The Audio Cords - Sony DVP-F21S Operating Instructions Manual

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select a connection
Select one of the following connections,
Connection
(page 23)
A
(page 24)
B
(page 24)
B
(page 26)
C
(page 28)
D
* Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
** "DTS" is a registered trademark of Digital Theater Systems, Inc.
22
Downloaded from:
Components to be connected
TV (stereo)
Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
MD deck/DAT deck
AV amplifier (receiver) with a Dolby* Surround (Pro Logic) decoder
(having L and R audio input jacks only, or having a digital input jack)
AV amplifier (receiver) having a Dolby Digital or DTS** decoder, and
a digital input jack
https://www.usersmanualguide.com/
through
A
• 2 speakers
(front L and R)
• 3 speakers
(front L and R, and rear (monaural))
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
.
D