Step 2: Connecting The Audio Cords - Sony DVP-F25 Service Manual

Notes
• Connect the player directly to the TV. If you pass the player signals via the VCR, etc., you may not receive
a clear image on the TV screen.
VCR
CD/DVD player
Connect
directly
When you play a disc recorded in the NTSC colour system, the player outputs the video
signal or the Setup Display etc. in the NTSC colour system and the picture may not appear
on the PAL colour system televisions. In this case, remove the disc.
• For Asian models only
You can switch the player's colour system to match the colour system of the connected TV (page 15).
20
Connecting to your TV
A
This connection will use your TV speakers for sound.
CD/DVD player
(red)(white)
(yellow)*
(red)
(red)
to AUDIO
OUT L/R
(white)
(white)
Audio/video
(yellow)*
cord (supplied)
EURO AV adaptor (supplied with some
models) to connect to the SCART (EURO
AV) input jack
l : Signal flow
* The yellow plug is used for video signals (page
18).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
AUDIO OUT L/R jacks to the TV's audio input
jack.
22
TV
to audio input
TV
1-5

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, through
A
Components to be connected Connection
TV
• Surround effects: TVS DYNAMIC (page 50),
TVS WIDE (page 50)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 50)
or
MD deck/DAT deck
• Surround effects: none
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 67)
AV amplifier (receiver) with a digital input jack
having a Dolby Digital, MPEG audio, or DTS**
decoder and 6 speakers
• Surround effects: Dolby Digital (5.1ch) (page 67),
DTS (5.1ch) (page 68), MPEG audio (5.1ch)
(page 68)
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
** "DTS" and "DTS Digital Out" are trademarks
of Digital Theater Systems, Inc.
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
CD/DVD player
Stereo audio
cord (not
supplied)
(white)
(red) (white)
or
(red)
to AUDIO OUT L/R
(white)
(red)
to audio input
[Speakers]
Stereo amplifier (receiver)
Front (L)
Front (R)
l: Signal flow
z Hint
Note
In connection B-1 , you can use the supplied
audio/video cord instead of using a separate audio
If you select one of the TVS effects (page 49) while
cord.
playing a disc, no sound will come from your
speakers with the
.
D
Your setup
(page 22) Example
A
B (page 23) Example
(page 24) Example
C
(page 25) Example
D
c continued
21
B-1 . If the amplifier
B-2 .
Optical digital cord
(not supplied)
to DIGITAL OUT
(OPTICAL)
to optical digital input
MD deck/DAT deck
connection.
B-2
c continued
23