Sony DVP-CX995V Operating Instructions (DVP-CX995V CD/DVD Player) Operating Instructions Manual page 84

◆ DISTANCE
Sets the distance from your listening position
to the speakers.
Set the distance to your front speakers in
"FRONT" first (A). Then adjust the values in
"CENTER" (center speaker B), "REAR"
(rear speaker C), and "SUBWOOFER" (D)
to reflect the actual distance to your center
speaker, rear speakers, and subwoofer.
A
(1~30 ft)
C
Be sure to change the value in the Setup
Display each time you move the speakers.
Start from the front speaker. The default
adjustments are in parentheses.
FRONT
(10 ft)
CENTER (10 ft) Set this within –5 feet of the
REAR (10 ft)
Notes
• If each of the front or rear speakers are not placed
at an equal distance from your listening position,
set the distance according to the closest speaker.
• The minimum distance is 1 foot.
84
B
D
A
(1~30 ft)
C
Set this between 1 and 30
feet in 1 foot increments.
"FRONT" setting in 1 foot
increments. For example, if
"FRONT" is set to 20 feet,
"CENTER" can be set
between 15 and 20 feet.
Set this within –15 feet of
the "FRONT" setting in 1
foot increments. For
example, if "FRONT" is set
to 20 feet, "REAR" can be
set between 5 and 20 feet.
◆ LEVEL (FRONT)
Varies the level of the front speakers. Be sure
to set "TEST TONE" to "ON" for easy
adjustment.
The default adjustments are in parentheses.
L (0 dB) Set this between –6 dB and 0
dB in 0.5 dB increments.
R (0 dB)
Set this between –6 dB and 0
dB in 0.5 dB increments.
CENTER Set this between –12 dB and
(0 dB) 0 dB in 0.5 dB increments.
SUBWOOFER
Set this between –10 dB and
(0 dB) 0 dB in 0.5 dB increments.
◆ LEVEL (REAR)
Varies the level of the rear speakers. Be sure
to set "TEST TONE" to "ON" for easy
adjustment.
The default adjustments are in parentheses.
L (0 dB) Set this between –12 dB and
0 dB in 0.5 dB increments.
R (0 dB) Set this between –12 dB and
0 dB in 0.5 dB increments.
To adjust the volume of all the speakers at
one time
Use the amplifier's (receiver's) volume
control.
◆ TEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust "LEVEL."
OFF
The test tone is not emitted
from the speakers.
ON The test tone is emitted from
each speaker in sequence.