Step 4: Connecting The Audio Cords - Sony DVP-NC875V Service Manual

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, through
A
Components to be connected
TV
• Surround effects:
– TVS DYNAMIC (page 54)
– TVS WIDE (page 54)
Stereo amplifier (receiver) and two speakers
• Surround effects:
– TVS STANDARD (page 54)
or
MD deck/DAT deck
• Surround effects:
– TVS STANDARD (page 54)
1
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects:
– Dolby Surround (Pro Logic) (page 89)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 89)
– DTS (5.1 ch) (page 89)
– Super Audio CD Multi channel (page 89)
or
AV amplifier (receiver) with digital input jacks
2
having a Dolby Digital, or DTS* decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 89)
– DTS (5.1 ch) (page 89)
Connecting to your TV
A
This connection will use your TV's speakers for sound.
CD/DVD player
COAXIAL CENTER
L
Y P B P R
R
OPTICAL R L
PCM/DTS/ FRONT REAR WOOFER AUDIO VIDEO S VIDEO COMPONENT
DOLBY 5.1CH OUTPUT LINE OUT OUT VIDEO OUT
DIGITAL
DIGITAL
OUT
A
(yellow)*
R L
(white)
AUDIO VIDEO
LINE OUT
(red)
to LINE OUT
Audio/video
L/R (AUDIO)
cord (supplied)
l: Signal flow
* The yellow plug is used for video signals (page
19).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV's audio
input jack.
.
D
Connection Your setup (example)
(page 25)
A
(page 26)
B
(page 27)
C
(page 28)
D
, 23
TV
(yellow)*
(white)
(red)
to audio input
, 25
z Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection D .
*1 Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
*2 Manufactured under license from Digital
Theater Systems, Inc. U.S. Pat. No's.
5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535 and other U.S. and world-
wide patents issued and pending. "DTS" and
"DTS Digital Surround" are registered
trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2003 Digital Theater Systems,
Inc. All Rights Reserved.
24
B Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
CD/DVD player
COAXIAL CENTER
L
R
OPTICAL R
FRONT REAR WOOFER AUDIO
PCM/DTS/
DOLBY
5.1CH OUTPUT LINE OUT
DIGITAL
DIGITAL
OUT
B-2 Coaxial digital cord
(not supplied)
COAXIAL
OPTICAL
PCM/DTS/
DOLBY
DIGITAL
DIGITAL
OUT
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
to coaxial or optical digital input
[Speakers]
Front (L)
Front (R)
l: Signal flow
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT jacks.
26
1-5
DVP-NC875V
B-1 . If the amplifier
Y P P
B R
L
VIDEO S VIDEO COMPONENT
OUT VIDEO OUT
(red)
R L
or or
AUDIO
(white)
LINE OUT
to LINE OUT L/R (AUDIO)
Stereo audio cord
(not supplied)
(white) (red)
to audio input
Stereo amplifier (receiver)
MD deck/DAT deck
.
B-2
B-1
VIDEO