Table of Contents
Advertisement
Performance Lists
A "*" is shown in the first row, to the left of the Performance List
name to indicate that the list has been edited.
You can now select another Performance memory you want to
move, press the [QUICK MENU] button to confirm and repeat from
step (3).
NOTE
To save your edited Performance List see "Saving the edited
Performance List" (p. 63).
Rename a Performance
1.
Select the Performance memory you want to rename.
2.
Press the [QUICK MENU] button.
3.
Rotate the dial to select "Rename Performance", then push
the dial.
The right display changes to:
4.
Use the dial and the TONE [0]~[9] buttons to enter the
desired name. See "How to type a name in BK-9" (p. 27).
5.
Press the [WRITE] button to save the Performance
memory under the new name.
The display briefly confirms the operation and returns to the page
with all Performance List files on your USB memory.
If you specify a file name that already exists, the BK-9 displays the
following message: "Please enter a different name"
NOTE
To save your edited Performance List see "Saving the edited
Performance List" (p. 63).
Copy Performances
You can copy one, several or all Performances from one
Performance list to another. You can also copy and paste
Performance memories to different locations within their original
Performance List. And finally, you can copy "Music Assistant"
memories to one of your Performance lists.
1.
Select the Performance memory you want to start to copy
from the list.
2.
Press the [QUICK MENU] button.
62
Left Display
Right Display
Left Display
3.
Rotate the dial to select "Copy Performances", then push
the dial.
The right display changes to:
Right Display
4.
Rotate the dial to select one or several Performance
memories that you want to copy.
The selected Performances are displayed in reverse.
Right Display
You can only select adjacent memories (either before or after the
Performance memory selected in step (1) above).
5.
Press the dial to confirm your selection.
6.
Select the Performance List to which you want to copy the
selected Performance memory/memories.
To load another performance press the [LIST] button and select
another Performance list. See "Loading a Performance/'Music
Assistant'/'Factory Songs' List" (p. 57)".
MEMO
You can choose to paste the selected Performances in the same
Performance List.
7.
Select the Performance memory that should contain (the
first) Performance memory you copied.
8.
Press the [QUICK MENU] button to select the paste
function.
Advertisement
Table of Contents
