Using Performance Functions - Roland Jupiter-Xm Owner's Manual

Using Performance Functions

Splitting the Keyboard to Play Different
Sounds
(Split)
1.
Press the [FUNCTION] button
Chooses function mode.
2.
Press the [15] button.
Split turns on. The part 1 tone sounds in the right-hand region of
the keyboard, and the part 2 tone sounds in the left-hand region.
To return to the original state, press the
function mode.
* If you want to change the split point, enter function mode, then hold
down the [15] button and press the desired key; alternatively, you can use
SCENE ZONE EDIT to set the KEY RANGE. For details, refer to
Manual" (PDF).
Layering Two Sounds
1.
Press the [FUNCTION] button
Chooses function mode.
2.
Press the [16] button.
Dual is turned on. This layers the part 1 tone with the part 2 tone,
so that they are heard together.
To return to the original state, press the
function mode.
* If you hold down the [SHIFT] button
Dual on, settings are automatically made so that part 1 is output from L
and part 2 is output from R.
Transposing the Keyboard in Octave
Units
(Octave)
1.
Press the OCTAVE [DOWN] [UP]
To return to the original state, press the
buttons.
Transposing the Keyboard in Semitone
Steps
(Transpose)
1.
Hold down the [TRANSPOSE] button
[DOWN] [UP] button.
To return to the original state, hold down the
and press the OCTAVE [DOWN] button
Playing Single Notes
1.
Press the [FUNCTION] button
Chooses function mode.
2.
Press the [11] button.
Mono turns on.
To return to the original state, press the
function mode.
to make it light.
[15] button once again in
"Reference
(Dual)
to make it light.
[16] button once again in
and press the [DUAL] button to turn
button.
OCTAVE [DOWN] and [UP]
and press the OCTAVE
[TRANSPOSE] button
and [UP] button.
(Monophonic)
to make it light.
[11] button once again in
Layering the Same Tone to Thicken the
Sound
(Unison)
1.
Press the [FUNCTION] button
Chooses function mode.
2.
Press the [12] button.
Unison turns on.
To return to the original state, press the
function mode.
Preventing Dynamics Changes in Your
Performance
(Velocity Off )
1.
Press the [FUNCTION] button
Chooses function mode.
2.
Press the [13] button.
The velocity off setting is enabled. Your keyboard dynamics will not
affect the sound.
To return to the original state, press the
function mode.
Smoothly Changing the Pitch
1.
Press the [FUNCTION] button
Chooses function mode.
2.
Press the [14] button.
Portamento turns on.
To return to the original state, press the
function mode.
* In function mode, you can hold down the
[14] button to access the portamento time setting screen.
to make it light.
[12] button once again in
to make it light.
[13] button once again in
(Portamento)
to make it light.
[14] button once again in
[SHIFT] button and press the
15