Table of Contents
Advertisement
Track Edit Function
QUANTIZE
ERASE
DELETE
COPY
INSERT
KEY
CHANGE VELO
CHANGE GATE TIME
MERGE
GLOBAL CHANGE
SHIFT CLOCK
TRACK EXCHANGE
NOTE
The BK-9 has no Undo function. Saving your song before editing
will allow you to load the previous version if something goes
wrong.
Here is how to select functions:
1.
Load the song you wish to edit (if it does not yet reside in
the BK-9's Song internal memory).
See "Selecting a Song or Rhythm on a USB Memory" (p. 44).
2.
Press the [MENU] button, rotate the dial to select "16Track
Sequencer", then push the dial.
3.
Press the [QUICK MENU] button.
The left display changes to:
Left Display
4.
Use the dial to select "Track Edit".
The displays change to:
Left Display
5.
Use the dial to select the desiderate "Track Edit" function.
The BK-9 changes the focus from the left to the right display.
6.
Use the dial to select the track(s) you wish to modify.
7.
Use the dial to select the range ("From" and "To") for the
edit operation.
The "From" and "To" parameters allow you to specify the positions
(measure/beat/clock) of the track excerpt you want to change.
Page
Right Display
Editing one or several tracks (Track Edit)
Parameter
Setting
1~[last measure
From Bar
of the track or
song]
1~[number of
From Beat
beats per bar]
From Cpt
1~119
1~[last measure
To Bar
of the track or
song]
1~[number of
To Beat
beats per bar]
To Cpt
1~119
Example: to change measures 1~4 of the selected track, enter the
following values:
From: Bar= 0001
To: Bar= 0005
Beat= 01
Beat= 01
Cpt= 000
Cpt= 000
8.
Use the dial to specify what you want to change and how
it should change.
9.
Confirm the operation by pressing the [WRITE] button.
10.
Save your song.
See "Saving Your Song" (p. 84).
QUANTIZE
Use this function if you chose not to quantize your music during
recording and now realize that the timing is not quite what you
expected it to be. Quantizing after recording has the advantage
that you can first listen to the original and then correct only those
notes whose timing is definitely off.
Left Display
Parameter
Setting
Track
All, Trk 1~ Trk 16
Explanation
Refers to the first measure to be edited.
By default, the "From" value is set to the
beginning of the selected track(s).
Specifies the beat position. The number
of available beats depends on the time
signature in the selected area.
Refers to the starting CPT position.
"CPT" is short for "Clock Pulse Time", the
smallest unit used by the BK-9. (There
are 120 CPTs to every beat of a 4/4 bar.)
Change this setting only if your edit
operation should start after the selected
beat.
This is where you specify the bar position
of the last measure to be edited.
Specifies the beat position. The number
of available beats depends on the time
signature in the selected area.
Refers to the last clock that should be
affected by the edit operation. Change
this setting only if your edit operation
should not end exactly on the selected
beat.
Right Display
Explanation
Allows you to select the track you wish
to edit. You can also select "ALL" here,
in which case the operation applies to
all tracks.
85
Advertisement
Table of Contents
