Performance Settings - Roland FA-06 Quick Start Manual

Synthesizer (Performing)

Performance Settings

Raising/Lowering the Key Range in Semitones
(Transpose)
1.
Hold down the [TRANSPOSE] button and press the
[–] button or [+] button.
MEMO
You can change this setting in a range of -5–+6 semitones.
Playing Different Tones in the Right and Left Hands
(Split)
1.
Press the [SPLIT] button to make it light.
The split screen appears.
Divided at the split point, the right-hand keyboard region
plays the upper tone, and the left-hand keyboard region
plays the lower tone.
Lower tone
2.
To cancel split, press the [SPLIT] button to make it
go dark.
Switching tones
1.
Move the cursor to the tone that you want to switch,
and use the dial to select a different tone.
MEMO
You can also switch tones by pressing a tone button.
Changing the Keyboard Split Point (Split Point)
1.
Hold down the [SPLIT] button and press the key that
you want to be the new split point.
The key you press becomes the split point.
The split point key is included in the upper region.
12
Upper tone
Split point
Raising/Lowering the Key Range in Octaves (Octave)
1.
Press the OCTAVE [DOWN] button or [UP] button.
MEMO
• You can change this setting for a maximum of ±3 octaves.
• To restore the original setting, press the OCTAVE [DOWN]
button and [UP] button simultaneously.
Layering Two Tones (Dual)
1.
Press the [DUAL] button to make it light.
The dual screen appears.
The upper tone and lower tone are heard layered together.
Upper tone
Lower tone
2.
To cancel dual, press the [DUAL] button to make it
go dark.
Switching tones
1.
Move the cursor to the tone that you want to switch,
and use the dial to select a different tone.
MEMO
You can also switch tones by pressing a tone button.