Copy; Insert - Roland BK-9 Owner's Manual

Left Display
Parameter Setting
Track All, Trk 1~ Trk 16
From Bar
From Beat
From Cpt
For details information see p. 85.
To Bar
To Beat
To Cpt

COPY

The COPY function allows you to copy one track to another or
excerpts of one or all tracks to a different location. The latter is
useful if you need to repeat the chorus several times at the end of
the song but do not feel like recording all those notes.
Left Display
Parameter Setting
Source Track All, Trk 1~ Trk 16
From Bar
From Beat
From Cpt
For details information see p. 85.
To Bar
To Beat
To Cpt
Dest Trk Trk 1~ Trk 16
1~[last measure
Into Bar of the track or
song]
1~[number of
Into Beat
beats per bar]
Into Cpt 1~119
Right Display
Explanation
Allows you to select the track you wish
to edit. You can also select "ALL" here,
in which case the operation applies to
all tracks.
Right Display
Explanation
Allows you to select the track whose
data you wish to copy
This is where you select the track to
which you want to copy the selected
data. If you set "Source Track" to "ALL", the
"Dest Trk" setting cannot be changed.
The bar, beat and CPT values of the
position the first data of the source track
will be copied to.
Editing one or several tracks (Track Edit)
Parameter Setting
Copy Mode Replace, Mix
Copy Times 1~999
ALL, Note,
P.Bender, Control
Data Type Change, Program
Change, NRPN,
RPN, CAF,
If "Data Type" (see above) is set to "Note" the following parameters
are displayed also.
Parameter Setting
From Note C-~G9
To Note C-~G9
If "Data Type" (see above) is set to "Control Change" the following
parameters are displayed also.
Parameter Setting
From CC 0~127
To CC 0~127

INSERT

INSERT allows you to insert space and shift data that lie behind
the "From" position further towards the end of the song (this is the
exact opposite of DELETE).
These empty measures can be "filled" using the COPY function or by
recording new phrases in that area (using Punch In/Out).
Left Display
Explanation
Allows you to specify how the data
should be copied:
• Replace
The selected FROM/TO range overwrites
the data (of the destination track) in
the area to which the selected data are
copied.
• Mix
The data in the selected range of the
source track are added to the data on
the destination track.
Sets the number of copies you wish to
make. The value "3" means that you will
end up with 3 contiguous copies.
Allows you to select the data to be
copied.
Explanation
This parameter allows you to set the
note (or lower limit of the note range)
to be copied within the specified
"From"/"To" time range.
This parameter allows you to set the
upper limit of the note range to be
copied within the specified "From"/"To"
time range.
Explanation
It allows you to set the lower limit of the
control change numbers or values to be
copied within the specified "From"/"To"
time range.
This parameter allows you to set the
upper limit of the control change
numbers or values to be copied within
the specified "From"/"To" time range.
Right Display
87