Supernatural Edit (Only If A Supernatural Tone Is Selected) - Roland BK-9 Owner's Manual

Parameter Setting
C1 0~127
SuperNATURAL Edit (Only if a SuperNATURAL tone is
selected)
You can make parameters settings for the selected SuperNATURAL
instrument.
Refer to "SuperNATURAL INST Parameters" in the "Tone & Drum Kit
List " supplementary manual.
Download it from the Web http://www.roland.com/manuals/).
'Tone Part Effects' parameters
This function group can be selected using [MENU] button  "Performance
Edit"  "Tone Part Effects" or pressing and holding the [MFX] button. Your
BK-9 contains two multi-effects processor that can be used for processing
any keyboard part you like.
MEMO
There are also 3 multi-effects processors ("Mfx"), one reverb
processor and one chorus processor that can be used to process
Rhythm or Standard MIDI Files).
1.
Use the dial to select the desired function (Mfx1, Mfx2,
Reverb, Chorus,Upper1, Upper2, Lower, M.Bass). See
"Browsing Windows and Setting Parameter Values" (p.
26).
Mfx1
Mfx(1) Switch
Select "Off" if you don't need the Mfx processor.
Parameter Setting
Mfx Switch Off, On
Explanation
The function of this parameter depends on
the sound you assigned to the selected part. It
may influence the filter and resonance setting,
switch between the organ samples with the
fast and slow Rotary modulation, etc.
Right Display
Right Display
Mfx(1) Type
The BK-9 provides 84 different multi-effect types, some of which
are combinations of two effects for added flexibility. This parameter
allows you to select the desired type. The available types are:
N. Mfx Type N.
1 Thru 29
2 Stereo EQ 30
3 Overdrive 31
4 Distortion 32
5 Phaser 33
6 Spectrum 34
7 Enhancer 35
8 Auto Wah 36.
9 Rotary 37
10 Compressor 38
11 Limiter 39
12 Hexa-Chorus 40
13 Trem Chorus 41
14 Space-D 42
15 St. Chorus 43
16. St. Flanger 44
17 Step Flanger 45
18 St. Delay 46
19 Mod. Delay 47
20 3 Tap Delay 48
21 4 Tap Delay 49
22 Time Delay 50
23 2 Pitch Shifter 51
24 FBK Pitch 52
25 Reverb 53
26 Gate Reverb 54
27 ODChorus 55
28 ODFlanger 56
NOTE
Some of the names shown above may be abbreviated in the
display.
Mfx(1) Edit
1.
If you want to edit the parameters of the selected effect
type, you have to push the dial to select the "Mfx Edit"
page.
2.
Select and set the desired parameter(s). See "Browsing
Windows and Setting Parameter Values" (p. 26).
The first two parameters for each Mfx type are "Chorus Send"
(0~127) and "Reverb Send" (0~127).
They allow you to specify whether—and to what extent—the Mfx
signal should be processed by the Chorus and/or Reverb effect.
'Performance Edit' parameters
Mfx Type N. Mfx Type
57 VK Rotary
0OD Delay
DST Chorus 58 3D Chorus
DST Flanger 59 3D Flanger
DST Delay 60 3D Step Flgr
EH Chorus 61 Band Chorus
EH Flanger 62 Band Flanger
EH Delay 63 Band Step Flg
64 VS Overdrive
ChorusDLY
Flanger DLY 65 VS Distortion
CHO Flanger 66 GT Amp Simul
CHO/DLY 67 Gate
Flanger/DLY 68 Long Delay
CHO/Flange 69 Serial Delay
Isolator 70 MLT Tap DLY
Low Boost 71 Reverse DLY
Super Filter 72 Shuffle DLY
Step Filter 73 3D Delay
Humanizer 74 Long DLY
Speaker Sim 75 Tape Echo
Step Phaser 76 LoFi Noise
MLT Phaser 77 LoFi Comp
Inf Phaser 78 LoFi Radio
Ring Modul 79 Telephone
Step Ring 80 Phonograph
Tremolo 81 Step Pitch
Auto Pan 82 Sympa Reso
Step Pan 83 Vib-Od-Rotary
Slicer 84 Center Canc
Right Display
131