Infrared Interface - Samson TROVIS 6495 Series Mounting And Operating Instructions

13.1

Infrared interface

The infrared interface can be accessed from the front of the controller. It is located above the
SAMSON logo (Fig. 5).
An infrared adapter is required for data transmission between the serial RS-232 port of the
computer and the infrared interface integrated in the controller. A bracket ensures that the
adapter is properly aligned.
2
Fig. 5 · Connecting an infrared adapter
Note: To ensure data transmission functions properly, place the infrared adapter so that the
distance to the infrared interface does not exceed 0.7 m and that the max. angle 25° is kept.
1
1 Infrared adapter
2 COM port on the computer
(COM or with
USB 1.1 serial adapter connected
to the USB port)
Interfaces
49
EB 6495-2 EN