Data Transmission - Samson TROVIS 6495 Series Mounting And Operating Instructions

Setting and operation with TROVIS-VIEW software
14.5

Data transmission

The online mode in TROVIS-VIEW allows direct data transmission with the TROVIS 6495-2
Controller, whereas communication must first be established in the offline mode.
Communication can be established either using the infrared interface or a connecting cable
when one of the interface boards is fitted (see section 13).
The communication port must be set up first. See below.
14.5.1 Setting up communication port
1. Connect the infrared adapter to the
computer and bring it into alignment
with the controller.
Or:
Connect the serial port of the computer
using the SAMSON connecting cable to
the interface board of the controller.
2. Select Communications in Options
menu to open the server settings win-
dow. Click Server settings button.
3. Check Local connection and Auto-
matically local connect boxes and click
on OK button to confirm server settings.
The Communication window reappears.
4. Click Port settings button.
5. The settings window opens and State:
not searched yet appears in the Auto-
matic detection field. Click on Start
button.
TROVIS-VIEW has found the device
when State: Device found on COM ....
appears, click on OK button twice to
confirm settings.
66
EB 6495-2 EN