Set Up Items - Sony MVC-CD250 Operating Instructions (primary manual) Operating Instructions Manual

SET UP items

Set the mode dial to SET UP. The SET UP
screen appears.
Factory settings are indicated with x.
[DISC TOOL]
Item
FINALIZE
FORMAT
INITIALIZE
UNFINALIZE
[CAMERA]
Item
MOVING IMAGE
DATE/TIME
DIGITAL ZOOM
BRACKET STEP
(MVC-CD400 only)
RED EYE REDUCTION ON /
1)
HOLOGRAM AF /
2)
AF ILLUMINATOR
1)
MVC-CD400
2)
MVC-CD250
116
• The date and time are not superimposed
onto moving images and Clip Motion
images. The date and time do not appear
on the LCD screen during shooting.
These appear only during playback.
Setting
OK / CANCEL
OK / CANCEL
OK / CANCEL
OK / CANCEL
Setting
xMPEG MOVIE / CLIP MOTION /
MULTI BURST
xOFF
DAY & TIME DATE
/ /
x ON / OFF
±1.0EV / x±0.7EV / ±0.3EV
x OFF
AUTO / OFF
x
Description
Finalizes a disc to allow viewing through a disc drive (page 44).
Formats a CD-RW (page 42).
Initializes a disc (page 21).
Cancels the last executed finalization (page 46) (CD-RW only).
Description
Selects the shooting mode for a movie (pages 109, 77, 79 and 94).
Selects whether to superimpose the date or time onto the image (page 32).
Selects whether to use the digital zoom (page 27).
Sets the exposure compensation value when recording three images with each
exposure value shifted (page 75).
Reduces the red-eye phenomenon when using a flash (page 30).
Selects whether to emit AF illuminator light. Used when it is difficult to focus on
the subject under dark conditions (page 31).
1)
• The hologram AF or AF illuminator
does not emit light in the following
conditions:
– Twilight mode
– Landscape mode
2)