Sony MVC-CD250 Operating Instructions (primary manual) Operating Instructions Manual page 73

For MVC-CD400
Mode dial
Shutter
a Set the mode dial to
M, SCN, or .
b Press
repeatedly to select
the desired setting.
Each time you press , the metering
mode changes as follows:
Multi-pattern metering
Center-weighted metering
Spot metering
c Shoot the image.
Press and hold the shutter button
halfway down, wait until the camera
completes the automatic adjustments,
then press the shutter button fully
down to record the image.
For MVC-CD250
Mode dial
, S, A,
a Set the mode dial to
or .
b Press MENU.
The menu appears.
c Select
b/B, then select [ON] with v/V.
The spot metering cross hair is
displayed.
d Shoot the image.
Press and hold the shutter button
halfway down, wait until the camera
completes the automatic adjustments,
then press the shutter button fully
down to record the image.
Control button
Shutter
MENU
, SCN,
(SPOT METER) with
To cancel spot metering
Select (SPOT METER) with b/B on the
control button again, then select [OFF] with
v/V.
The spot metering cross hair disappears
from the LCD, and the camera returns to the
normal metering mode.
73