Still Image Editing; Protecting Images - Protect; In Single-Image Mode; In Index (Nine-Image) Mode - Sony MVC-CD250 Operating Instructions (primary manual) Operating Instructions Manual

Still image editing

Protecting images
– Protect
Mode dial:
This function protects images against
accidental erasure. Note that when you
format a CD-RW (page 42), all the images
recorded on that CD-RW will be deleted
even if they are protected.
Control button
Mode dial
MENU
• If you protect an image, the disc remaining
space will decrease. If you cancel the
protection, the disc remaining space will also
decrease.
• If the disc remaining space is not sufficient, you
may not be able to protect an image.

In single-image mode

a Set the mode dial to
b Display the image you want to
protect with b/B.
c Press MENU.
The menu appears.
d Select [PROTECT] with b/B,
then press z.
The displayed image is protected. The
- (protect) indicator appears on the
image.
60min
640
5/5
DELETE PROTECT PRINT SLIDE
OK
To cancel the protection
Press z again in step 4. The - (protect)
indicator disappears.

In index (nine-image) mode

a Set the mode dial to
.
press the zoom W button once
to display the index (nine-
image) screen.
b Press MENU.
The menu appears.
c Select [PROTECT] with b/B,
then press z.
d Select [SELECT] with b/B,
then press z.
e Select the image you want to
protect with v/V/b/B, then
press z.
The - (protect) indicator appears on
the selected image.
•
MENU
SET
f Repeat step 5 to protect other
images.
, then
TO NEXT
89