Still Image Editing; Protecting Images - Protect - Sony Cyber-shot DSC-F828 Operating Instructions Manual

Protecting images
– Protect
Mode dial:
To prevent accidental erasure of an
important image, you can protect it.
Multi-selector (v/V/b/B)
MENU
Mode dial
/
• Note that formatting the recording medium
erases all the data in the recording medium
even if images are protected, and these images
cannot be recovered.
• It may take some time to protect the images.
On the single screen
a Set the mode dial to
b Display the image you want to
protect with b/B.
c Press MENU.
The menu appears.
d Select - (Protect) with b/B,
then press the center of the
multi-selector.
The image currently being displayed is
now protected, and the - (Protect)
mark is indicated on the screen.
80
min
VGA
101 2/9
Protect
Exit
BACK/NEXT
e To protect other images,
display the image you want to
protect with b/B, then press
the center of the multi-
selector.
To cancel the protection
In Step 4 or 5, press the center of the
multi-selector again. The - mark
disappears.
On the Index screen
a Set the mode dial to
.
/ (index) to switch to the
Index screen.
b Press MENU.
The menu appears.
c Select - (Protect) with b/B,
then press the center of the
multi-selector.
d Select [Select] with b/B, then
press the center of the multi-
selector.
e Select the image you want to
protect with v/V/b/B, then
press the center of the multi-
selector.
The green - (Protect) mark is
indicated on the selected image.
SELECT MENU TO NEXT
f To protect other images,
repeat Step 5.

Still image editing

, press
89