Indicators On The Screen During Shooting; Using The Zoom Feature - Sony Cyber-shot DSC-F828 Operating Instructions Manual

Indicators on the screen during shooting

Each time you press
display changes in the following order.
• The status of the screen changes between
indicators-on and indicators-off when playing
back or shooting movies.
• For a detailed description of the indicators, see
page 150.
• For a detailed description of the histogram, see
page 60.
• This setting is maintained even when the power
is turned off.
30
(screen status), the
Indicators on
80
min 101
8M
98
MAF
r
Histogram on
(Image information is
displayed during playback)
80
min
101
8M
98
MAF
r
Indicators off
MAF

Using the zoom feature

T (telephoto) W (wide-angle)
80 80
min 101 min 101
8M 8M
98 98
x5.0 x1.1
Zoom ring
, Turn the zoom ring to choose
the desired image size for
shooting.
You can zoom in up to 7.1× using the
optical zoom.
The minimum distance needed to
focus on a subject
When the zoom is set all the way to
the W side:
3
approximately 50 cm (19 / inches) from
4
the end of the lens
When the zoom is set all the way to
the T side:
5
approximately 60 cm (23 / inches) from
8
the end of the lens
• When not using the camera, retract the lens in
by setting the lens to its W-end position to
protect it.