Still Image Editing; Protecting Images - Protect; On The Single Screen; On The Index (Nine-Image) Screen - Sony DSC-P92 Operating Instructions (primary manual) Operating Instructions Manual

Protecting images
– Protect
Mode selector:
To prevent accidental erasure of an
important image, you can protect it.
Control button
MENU
Mode selector
Zoom buttons

On the single screen

a Set the mode selector to
b Display the image you want to
protect with b/B.
c Press MENU.
The menu appears.
d Select [Protect] with b/B, then
press z.
The image currently being displayed is
now protected, and the - (Protect)
mark is indicated on the screen.
VGA
2/9
101
Protect
Exit
OK BACK/NEXT
e To protect other images,
display the image you want to
protect with b/B, then press
z.
To cancel the protection
In Step 4 or 5, press z again. The -
mark disappears.
On the Index (nine-image)
screen
.
a Set the mode selector to
press the zoom W (index)
button once to switch to the
Index (nine-image) screen.
b Press MENU.
The menu appears.
c Select [Protect] with b/B, then
press z.
d Select [Select] with b/B, then
press z.
e Select the image you want to
protect with v/V/b/B, then
press z.
The green - (Protect) mark is
indicated on the selected image.
SELECT MOVE
f To protect other images,
repeat Step 5.
g Press MENU.

Still image editing

,
MENU TO NEXT
63