Viewing Images On A Tv Screen - Sony Cyber-shot DSC-F828 Operating Instructions Manual

Viewing images on a TV screen

A/V
connecting
cable
(supplied)
A/V OUT
(MONO)
1
jack
, Connect the supplied A/V
connecting cable to the A/V
OUT (MONO) jack of the
camera and the audio/video
input jacks of the TV.
If your TV has stereo type input jacks,
connect the audio plug (black) of the A/V
connecting cable to the Lch audio input
jack.
• Turn off both the camera and the TV before
connecting the camera and the TV with the A/V
connecting cable.
2
TV/Video switch
, Turn on the TV, and set the TV/
Video switch to "Video."
• The name and location of this switch may differ
depending on your TV. For details, refer to the
operating instructions supplied with the TV.
80
min
8M
2 9
101 /
101-0002 2004 1 1 10:30
PM
BACK/NEXT VOLUME
3
, Set the mode dial to
turn on the camera.
Move the multi-selector to b/B to select the
desired image.
• When using the camera abroad, it may be
necessary to switch the video output signal to
match that of your TV system (page 142).
• To select the recording medium, use the
CF switch (page 21).
, and
/
41