Printing Images - Sony Cyber-shot DSC-F828 Operating Instructions Manual

When [USB Connect] is not set
to [PictBridge] in the SET UP
settings
You cannot use the PictBridge function,
even when you turn on the camera. Set
[USB Connect] to [PictBridge].
1 Press MENU and select [USB Connect],
then press the center of the multi-
selector.
2 Select [PictBridge] with v , then press
the center.
USB Connect
PictBridge
PTP
Normal
94

Printing images

You can select an image and print it. Set up
the camera following the procedure on page
93, and then connect the printer.
/
Multi-selector (v/V/b/B)
MENU
• You cannot print movies and images recorded
in RAW mode.
• When printing E-mail mode images or
uncompressed (TIFF) images, only their
corresponding JPEG files are printed.
• If an error message is sent from the connected
printer during the connection,
about five seconds. In such cases, check the
printer.
• Note that printing is canceled if you switch the
/CF switch while printing images.
On the single screen
a Select the recording medium
with the
display the image you want to
print with b/B.
b Press MENU.
The menu appears.
c Select
press the center of the multi-
selector.
d Select [This image] with v/V,
then press the center of the
multi-selector.
The Print screen appears.
/CF switch
Print
Index
Date
Quantity
Exit
e Select [Quantity] with v/V,
select the number of images
flashes for
with b/B.
You can select the number up to 20.
/CF switch and
(Print) with b/B, then
8M
2 9
101 /
Off
Off
1
OK