Connecting The Camera To Your Computer - Sony Cyber-shot DSC-F828 Operating Instructions Manual

Connecting the camera to
your computer
a Insert the recording medium
with the images you want to
copy into the camera. Connect
the supplied AC Adaptor, and
plug the adaptor into a wall
outlet (wall socket).
AC Adaptor
To a wall outlet
(wall socket)
• Select the recording medium with the
switch (page 21).
• When you copy images to your computer using
the battery pack, copying may be failed or
cause data corruption by battery shutoff. We
recommend that you use the AC Adaptor.
b Turn on your computer and the
camera.
c Connect the supplied USB
cable to the
the camera.
d Connect the USB cable to your
computer.
/CF
• When using a desktop computer, connect the
USB cable to the USB connector on the rear
panel.
• When using Windows XP, the AutoPlay wizard
automatically appears on the desktop. Proceed
to page 112.
(USB) jack of
"USB Mode Normal" appears on the screen
of the camera. When a USB connection is
established for the first time, your computer
automatically runs the used program to
recognize the camera. Wait for a while.
* During communication, the access indicators
turn red.
• If "USB Mode Normal" does not appear in Step
4, press MENU, select [USB Connect], and
set it to [Normal].
• When using a Microdrive/CF card, opening the
CF card cover cancels the USB connection. Do
not open the CF card cover during the USB
connection.
USB Mode
Normal
Access
Memory Stick
indicators*
Switch on
MENU
109