Storing The Camera Settings In Memory - Presetting Feature - Sony BRC-300P Operating Instructions Manual

Storing the Camera
Settings in Memory
– Presetting Feature
Up to sixteen combinations of settings (sixteen
positions), including camera position, zooming,
focusing, and backlighting, can be stored in the memory
of the camera using the RM-BR300 Remote Control
Unit.
The number of positions that can be stored depends on
the camera model. You can store up to six positions on
a BRC-300/300P camera.
For details of the camera settings to be preset, see
"Presetting Items" on page 62.
5 1
RESET
VALUE LOCK
PANEL
LIGHT
RESET
– +
R
PRESET
MODE
BRIGHT
1 2
SHIFT
9 10
STD REV
– +
L/R
DIRECTION
B
AUTO
FOCUS
AUTO 1 2
POWER
MANUAL
ONE PUSH
NEAR FAR AF
4
1
Press the PAN-TILT RESET button to reset the pan/
tilt position.
2
Press the CAMERA button to select the camera
whose settings you want to preset.
3
Adjust the position, zooming, focusing and
backlighting of the camera. (See page 36 to 39.)
4
Press the SHIFT button to select the function of
POSITION 1 to 8 buttons, if necessary.
To store in positions 1 to 8, press the SHIFT button
so that the upper indicator lights. The POSITION
1 to 8 buttons can be used for positions 1 to 8.
To store in positions 9 to 16, press the SHIFT button
so that the lower indicator lights. The POSITION 1
to 8 buttons can be used for positions 9 to 16.
for positions 1 to 8
SHIFT
for positions 9 to 16
40
Storing the Camera Settings in Memory – Presetting Feature
BLACK PAN-TILT ONE PUSH
MENU
LIGHT RESET AWB
POSITION
3 4 5 6 7 8
11 12 13 14 15 16
CAMERA
3 4 5 6 7
2
5
While holding down the PRESET button, press any
of the POSITION buttons, 1 to 8, in which you want
to store the settings.
Press a POSITION button.
RESET
1 2 3
9 10 11
PRESET
While holding down
The settings are stored in the memory of the
camera.
The pressed button flashes during storing. Flashing
stops when storing is completed.
To recall the stored settings
Select the function of the POSITION 1 to 8 buttons
using the SHIFT button, if necessary. Press any of the
POSITION buttons, 1 to 8, in which you have stored the
settings.
To cancel the preset memory
Select the function of the POSITION 1 to 8 buttons
using the SHIFT button, if necessary. While holding
down the RESET button, press the POSITION button
from which you want to cancel the settings.
While holding down
RESET
1 2 3
9 10 11
PRESET
The pressed button flashes during canceling of the
settings. Flashing stops when the settings have been
canceled.
Notes
• When the power is turned on, the camera starts with
the settings stored in POSITION 1.
• If you want to retain the previous pan and tilt positions
when the power is turned off and turned on again, store
those positions in POSITION 1.
• When you are storing or canceling the settings in one
POSITION, you cannot call up, store or cancel the
settings in another POSITION.
4 5 6 7 8
12 13 14 15 16
Press a POSITION button.
4 5 6 7 8
12 13 14 15 16