Operating A Brc-300/300P Camera From A Long Distance - Sony BRC-300P Operating Instructions Manual

Operating a BRC-300/300P Camera from a Long Distance

This system allows you:
• To operate the camera remotely from a distance up to 500 m (1,640 feet)
• To perform pan/tilt and zoom operations comfortably using the joystick
• To transmit the video signal and control signal of the camera to a distant place using the Optical Fiber Cable
System configuration
BRC-300/300P
BRBK-303 Optical Multiplex Card
Video signal
Remote control (VISCA) signal
,
Notes
• The BRC-300/300P camera does not operate if nothing is connected to the BRBK-303 Optical Multiplex Card
inserted into the camera. To operate the camera, connect the BRU-300/300P Optical Multiplex Unit to the BRBK-
303 using the CCFC-M100 Optical Fiber Cable and turn on the power of the BRU-300/300P.
• When the BRBK-303 Optical Multiplex Card is inserted into the BRC-300/300P camera, the EXT SYNC connector,
VISCA RS-232C IN/OUT connectors and VISCA RS-422 connector on the rear of the camera and the BOTTOM
switches on the bottom of the camera are disabled. Use the connectors and switches on the rear of the BRU-300/300P
Optical Multiplex Unit instead.
12
System Configuration
CCFC-M100 Optical Fiber Cable
Signal flow
Video monitor, VTR, etc.
BRU-300/300P
Optical Multiplex
Unit
RM-BR300 Remote Control Unit