Installation Fitting Kits; Installation Fitting Assemblies - Hellenbrand ProMate 1 Owner's Manual

101639 - Fitting 1" PVC Male NPT
108617 - Fitting 3/4" Lead Free Brass Sweat
101648 - Fitting 1-1/4" & 1-1/2" Brass Sweat
1
2
3
110136 - Fitting 1" Brass Sharkbite
27

INSTALLATION FITTING ASSEMBLIES

101640 - Fitting 3/4" & 1" PVC Solv 90
101643 - Fitting 1" Male NPT
101646 - Fitting 1-1/4" &1-1/2" PVC Solvent
108478 - Fitting 3/4" John Guest QC
108618 - Fitting 1" Lead Free Brass Sweat
101644 - Fitting 1-1/4" Male NPT
1
2
3
110135 - Fitting 3/4" Brass Sharkbite
The nuts and caps are designed to be unscrewed or
tightened by hand or with the special plastic wrench.
If necessary a pliers can be used to unscrew the
nut or cap. Do not use a pipe wrench to tighten or
loosen nuts or caps. Do not place screwdriver in
slots on caps and/or tap with a hammer.
Do not use pipe dope or other sealants on threads.
Teflon tape must be used on threads of the 1" NPT
connection and on the threads for the drain line
connection. Teflon tape is not necessary on the nut
connection nor caps because of o-rings seals.
ITEM NO. ORDER NO. DESCRIPTION
1 102141 Nut 1" Quick Connect
2 102437 Split Ring
3 102165 O-Ring 215