Page 1
H200 & H200HF SERIES WATER CONDITIONERS H200 Top Mount For Commercial & Industrial Applications Apartment Buildings Boiler Water Treatment Car Washes Commercial Buildings Condominiums Factories Hospitals H200 Side Mount Laundries Mobile Home Parks Motels and Hotels Nursing and Rest Homes Office Buildings Restaurants Schools...
Page 2
H200/H200HF system for your particular application. Brine Connector Internal Meter (H200 Series Only) Inlet Outlet Removable...
Page 3
H200HF Series. • Both two-inch FPT and 2.5” Victaulic Inlet/ Outlet are standard on the H200 Series. • Lead free brass body with NSF Approved Food Grade Electro-Deposited Epoxy Coating to pro- tect internally and externally against corrosion.
H200/H200HF Diagnostic and History Screens provide the water treatment operator with a wealth of information. Page 20 Accessed by pressing UP and DOWN simultaneously for >3 seconds. DIAGNOSTIC 1 DIAGNOSTIC 2 DIAGNOSTIC 3 DIAGNOSTIC 4 Diagnostic Screens Returns to normal operation after 5 minutes. Diagnostic Screens DIAGNOSTICS 1 Days since the last regeneration.
Page 5
H200/H200HF Diagnostic and History Screens provide the water treatment operator with a wealth of information. WS2H Control Valve Manual DIAGNOSTIC 5 DIAGNOSTIC 6 DIAGNOSTIC 7 Return To Normal Operation Return To Normal Operation Diagnostic Screens (continued) Max fl ow rate of the day DIAGNOSTICS 5 Maximum fl...
H200/H200HF Diagnostic and History Screens provide the water treatment operator with a wealth of information. Page 22 Valve History Screens • Total days in operation • Total regenerations since start-up • Total volume of treated water Accessed by pressing UP and DOWN simultaneously for >3 seconds, then by pressing UP and DOWN simultaneously again for >3 seconds.
Page 7
Regeneration may occur im- mediate or during preset windows of time. Note: H200 Series have built-in internal meters on each unit. Alternating Individual Meters - Twin, tri-plex or four-plex designs. One unit is always in service and the remaining units are either in service, stand-by or regeneration.
Page 8
H200 Series . MINERAL TANK: Fiberglass tank with Polyethylene Inner Shell and Fiberglass Roving Manufactured to Operate at 150 psi. NSF Approved. B. DISTRIBUTOR SYSTEM: Two-Inch Hub & Lateral Dis- tributor for Maximum Service Flow and Minimal Pressure Loss. C. MINERAL: High Capacity Ion Exchange Resin. Uniform and stable beads assure long life, high salt efficiency, and maximum hardness removal.
Page 10
H200 Twin Alternating - Side Mount Shut-Off Valve Brine Tank See NOTE Figure 7 MAV = Motorized Alternating Valve. H200 Twin/Triplex/Fourplex Installation - Side Mount First-in, Last-Out Piping Arrangement. Bypass Valve Inlet Brine Tank(s) NOTE: System connections to the tank must accommodate longitudinal movement between side, top and bot- tom openings, flexibility in piping or flex connectors are recommended.
Page 11
H200 HF Single Tank Installation See NOTE Figure 7 Air or water operated H200 HF Twin Alternating Installation Inlet Pipe is on an angle DLFC See NOTE Figure 7 Air or water operated H200 HF Triplex/Fourplex Installation Inlet Pipe is on an angle Meter DLFC...
Page 12
5. Backwash flow rates are calculated at 4 gpm per sq. ft. of bed area and rounded off based on 50ºF water temperature. 6. Refer to Hellenbrand Bulletin 2050 “Flow Rates and Soft Water Quality (Hardness Leakage) if your application requires that levels of hardness leakage do not exceed “x”. H200 Series Top Mount Dimensions SYSTEM...
Page 13
PIPE SIZE MINERAL TANK MODEL (INCHES) (INCHES) H200HF-300-24-3 24 X 72 H200HF-300-30-3 30 X 72 H200HF-450-30-3 30 X 72 H200HF-450-36-3 36 X 72 H200HF-600-3 36 X 72 H200HF-750-3 42 X 72 H200HF-900-3 42 X 72 H200HF-1200-3 48 X 72 H200HF-1200-4 48 X72 H200HF-1500-3 54 X 72*...