Summary of Contents
-
Page 1
Owner’s Manual Manufactured by:...
-
Page 2
TABLE OF CONTENTS FREQUENTLY ASKED QUESTIONS...
-
Page 3
JOB SPECIFICATION SHEET...
-
Page 4
Hardness Regeneration Maintenance of Your Softener Salt: Cleaning Salt Keeper: SOFT WATER BASICS OPERATING CONDITIONS...
-
Page 5
PRE-INSTALLATION CHECK LIST Note: Well and/or pump problems affecting the operation of the softener are repairs that are not covered under warranty. To prevent these unnecessary, and expensive repairs that are not covered under warranty, we recommend the installation of an in-line filter system ahead of softener installations.
-
Page 6
INSTALLATION INSTRUCTIONS...
-
Page 7
PROGRAMMING Initial Start Up...
-
Page 8
STEP 1 SET TIME OF DAY STEP 2 STEP 3 STEP 1 STEP 2 Hardness: STEP 3 Day Override: STEP 4 STEP 5 INSTALLER DISPLAYS/SETTINGS...
-
Page 9
SET SALT MONITOR OPTION Regeneration Mode Manual Regeneration...
-
Page 10
CYCLE TIME ADJUSTMENTS...
-
Page 12
WATER SOFTENER DISINFECTION WATER SOFTENER DRAINING PROCEDURE MISCELLANEOUS...
-
Page 13
TROUBLE SHOOTING...
-
Page 14
TROUBLE SHOOTING...
-
Page 15
PROMATE-1 CONDITIONER & SALT KEEPER ASSEMBLIES...
-
Page 19
WATER METER AND METER PLUG BYPASS VALVE...
-
Page 20
INSTALLATION FITTING ASSEMBLIES...
-
Page 22
PROMATE 1 SYSTEM SPECIFICATIONS ED-“ELECTRONIC DEMAND” TC-“TIME CLOCK”...
-
Page 23
PROGRAMMING OPTIONS GENERAL SPECIFICATIONS...
-
Page 24
PROMATE-1 WARRANTY...
Comments to this Manuals
Latest comments: