With a parallel interface model, this command is not executed in the following status because the
printer is busy and unable to receive data from the host computer.
Receive buffer is full when DIP switch 2-1 is set to on.
Printer is off-line, an error occurs, or receive buffer is full when the DIP switch 2-1 is set to
off.
n
Request
1
Restarts printing from the beginning of the line where an
error occurred, after recovering from the error.
2
Recovers from an error after clearing the receive and print
buffers.
PRINT #1, CHR$(&H10);CHR$(&H5);CHR$(2);
Rev. A
TM-T88/T88P (TM-T85/T85P) Information Manual
Program Example
Command Descriptions 1-53