Epson TM-T88 Information Manual page 49

Program Example
PRINT #1, CHR$(&H1D);"h";CHR$(50);←
PRINT #1, CHR$(&H1D);"k";CHR$(2);←
PRINT #1, "496595707379";CHR$(0);
PRINT #1, CHR$(&HA);
PRINT #1, CHR$(&H1D);"h";CHR$(100);←
PRINT #1, CHR$(&H1D);"k";CHR$(2);←
PRINT #1, "496595707379";CHR$(0);
PRINT #1, CHR$(&HA);
GS w n
[Name] Set bar code width
[Format] ASCII
Hex
Decimal
2 ≤ n ≤ 6
[Range]
GS w n selects the horizontal size of a bar code. n specifies the bar code width as shown below. The
multilevel bar codes are UPC-A, UPC-E, JAN13 (EAN13), JAN8 (EAN8), CODE93, and CODE128.
The binary level bar codes are CODE39, ITF, and CODABAR. The default setting is n=3.
Module Width (mm) for
n
Multilevel Bar Code
2 0.282
3 0.423
4 0.564
5 0.706
6 0.847
1-40 Command Descriptions
Set height to 50
Print bar code
Set height to 100
Print bar code
GS w n
1D 77 n
29 119 n
Binary Level Bar Code
Thin Element Width (mm)
0.282
0.423
0.564
0.706
0.847
Print Sample
← Height: 50 dots
← Height: 100 dots
Thick Element Width (mm)
0.706
1.129
1.411
1.834
2.258
Rev. A