Epson TM-T88 Information Manual page 22

ESC ! n
[Name] Select print mode(s)
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 255
[Range]
ESC ! n selects print modes using n as follows. The default setting is n=0. This command is effective
for all characters (except for HRI characters). When underline mode is turned on, 90° clockwise-
rotated characters and white/black reverse characters cannot be underlined.
Bit Off/On Hex Decimal
Off 00 0
0
On 01 1
1, 2 — — —
Off 00 0
3
On 08 8
Off 00 0
4
On 10 16
Off 00 0
5
On 20 32
6 – – –
Off 00 0
7
On 80 128
Program Example
PRINT #1, CHR$(&H1B);"!";CHR$(0); "AA";
PRINT #1, CHR$(&H1B);"!";CHR$(8); "BB";
PRINT #1, CHR$(&H1B);"!";CHR$(16); "CC";
PRINT #1, CHR$(&H1B);"!";CHR$(24); "DD";
PRINT #1, CHR$(&H1B);"!";CHR$(32); "EE";
PRINT #1, CHR$(&H1B);"!";CHR$(40); "FF";
PRINT #1, CHR$(&H1B);"!";CHR$(48); "GG";
PRINT #1, CHR$(&H1B);"!";CHR$(56); "HH"; CHR$(&HA);
PRINT #1, CHR$(&H1B);"!";CHR$(129); "AA";
PRINT #1, CHR$(&H1B);"!";CHR$(137); "BB";
PRINT #1, CHR$(&H1B);"!";CHR$(145); "CC";
PRINT #1, CHR$(&H1B);"!";CHR$(153); "DD";
PRINT #1, CHR$(&H1B);"!";CHR$(161); "EE";
PRINT #1, CHR$(&H1B);"!";CHR$(169); "FF";
PRINT #1, CHR$(&H1B);"!";CHR$(177); "GG";
PRINT #1, CHR$(&H1B);"!";CHR$(185); "HH"; CHR$(&HA);
Rev. A
TM-T88/T88P (TM-T85/T85P) Information Manual
ESC !
1B 21
27 33
Function
Character font A (12 x 24) selected.
Character font B (9 x 24) selected.
Undefined.
Emphasized mode not selected.
Emphasized mode selected.
Double-height mode not selected.
Double-height mode selected.
Double-width mode selected.
Double-width mode not selected.
Undefined.
Underline mode not selected.
Underline mode selected.
n
n
n
AA: Normal
BB: Emphasized
CC: Double-height
DD: Emphasized + Double-height
EE: Double-width
FF: Emphasized + Double-width
GG: Double-height + Double-width
HH: Emphasized + Double-height + Double-width
Print Sample
←
Font A (12x24)
←
Font B (9x24)
with underline
Command Descriptions 1-13