Epson TM-T88 Information Manual page 59

Program Example
PRINT #1, CHR$(&H1D);"I";CHR$(1);←
ESC p m t1 t2
[Name] Generate pulse
[Format] ASCII
Hex
Decimal
[Range] m = 0, 1, 48, 49
0 ≤ t1 ≤ 255
0 ≤ t2 ≤ 255
ESC p m t1 t2 sends a pulse (on time= t1 × 2 msec / off time= t2 × 2 msec) to the specified connector
pin. When m=0 or 48, the pulse is sent to drawer kick-out connector pin 2; when m=1 or 49, the pulse
is sent to drawer kick-out connector pin 5.
Program Example
PRINT #1, CHR$(&H1B);"p";CHR$(0);CHR$(25);CHR$(250);
ESC = n
[Name] Select peripheral device
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 255
[Range]
ESC = n selects the device to which the host computer sends data, based on the value of n as follows:
Bit Off/On Hex Decimal
Off 00 0
0
On 01 1
1-7 – – –
When the LSB (least significant bit) of n is 1, the printer is enabled; when it is 0, the printer is disabled.
1-50 Command Descriptions
Transmits printer ID
ESC p
1B 70
27 112
ESC =
1B 3D
27 61
Function
Printer disabled.
Printer enabled.
Undefined.
m t1 t2
m t1 t2
m t1 t2
n
n
n
Rev. A