Epson TM-T88 Information Manual page 44

Bit Off/On Hex Decimal
Off 00 0
*2, 3
On (0C) (12)
4 Off 00 0
5, 6 — — —
7 Off 00 0
* For TM-T88/T88P, when the cover is open, paper detection may be incorrect.
Drawer kick-out connector status (n=2, 50).
Bit Off/On Hex Decimal
Off 00 0
0
On 01 1
1-3 — — —
4 Off 00 0
5, 6 — — —
7 Off 00 0
DLE EOT n
[Name] Real-time status transmission
[Format] ASCII
Hex
Decimal
1 ≤ n ≤ 4
[Range]
DLE EOT n transmits the specified status in real time.
With a serial interface model, this command is executed even when the printer is off-line, the receive
buffer is full, or an error occurs.
With a parallel interface model, this command is not executed in the following status because the
printer is busy and unable to receive data from the host computer.
Receive buffer is full when DIP switch 2-1 is set to On.
Printer is off-line, an error occurs, or receive buffer is full when DIP switch 2-1 is set to Off.
Rev. A
TM-T88/T88P (TM-T85/T85P) Information Manual
Status
Paper roll end sensor: paper present.
Paper roll end sensor: paper not present.
Not used. Fixed to Off.
Undefined.
Not used. Fixed to Off.
Status
Drawer kick-out connector pin 3 is LOW.
Drawer kick-out connector pin 3 is HIGH.
Undefined.
Not used. Fixed to Off.
Undefined.
Not used. Fixed to Off.
DLE EOT
10 04
16 4
n
n
n
Command Descriptions 1-35