Table of Contents
Advertisement
5
STATUS
LED indicating operating status:
Green On
Green Flashing
Red On
6
POWER
LED indicating power status:
Green On
Off
Cabling the Device
1.
Connect the device's Ethernet port labeled WAN to your Internet router, using an RJ-45 Ethernet cable.
2.
Connect the device's Ethernet port labeled LAN/PC to your computer, using an RJ-45 Ethernet cable.
3.
Connect the device's telephone ports labeled PHONE to your analog telephones or faxes, using RJ-11
telephone cables.
4.
(Optional) For primary or secondary (backup) WAN, connect a 3G/4G cellular modem dongle to the
USB port labeled USB.
5.
Connect the device to a standard 110/220 VAC electrical wall outlet, using the supplied AC power
adapter; the POWER LED turns on (green) and when initialization completes (~ 1 minute), the STATUS
LED changes from red to green.
Device bootup completed successfully
Firmware upgrade or configuration update in process (all other LEDs
also flash, except POWER LED)
Device booting up
Power received by device
No power
4 |
P a g e
Advertisement
Table of Contents
