Rear Panel Description - AudioCodes MediaPack 20 Series Quick Setup Manual

Rear-Panel Description
2
1
[Number of FXS Phone Ports and Presence of USB Port Depend on MP-20x Model]
1 12VDC AC power socket.
2 RST
Reset pinhole button for resetting the device or restoring it to factory defaults.


3 USB
USB 2.0 port which can be used for connecting a 3G/4G LTE cellular modem (USB
dongle) for primary or secondary (backup) WAN, a network printer for LAN users,
or an external storage device.
Note: The USB port is available only on these MP-20x models: MP-204B/4S/SIP,
MP-202R/2S/SIP/CER/R, and MP-204R/4S/SIP/CER/R.
4 WAN
WAN Ethernet port interface (RJ-45) for connecting to the WAN.
Note: The Ethernet port speed depends on the MP-20x model:


5 LAN/PC
LAN Ethernet port interface (RJ-45) for connecting to a LAN computer.
Note: The Ethernet port speed depends on the MP-20x model:


6 PHONE
Foreign Exchange Subscriber (FXS) ports for connecting analog telephones.
Note: The number of FXS ports depends on the MP-20x model:


4
3
To reset: With a paper clip (or any other similar pointed object), press the
button for at least 1 second, but no more than 5 seconds.
To restore to factory defaults: With a paper clip (or any other similar pointed
object), press the button for at least 7 seconds, but no more than 25 seconds.
Fast Ethernet (100Base-T): MP-202B/2S/SIP
Gigabit Ethernet (10/100/1000Base-T): MP-204B/4S/SIP, MP-
202R/2S/SIP/CER/R, and MP-204R/4S/SIP/CER/R
Fast Ethernet (100Base-T): MP-202B/2S/SIP
Gigabit Ethernet (10/100/1000Base-T): MP-204B/4S/SIP, MP-
202R/2S/SIP/CER/R, and MP-204R/4S/SIP/CER/R
2: MP-202B/2S/SIP and MP-202R/2S/SIP/CER/R
4: MP-204B/4S/SIP and MP-204R/4S/SIP/CER/R
2 |
5
P a g e
6