Installing The Camera Base; Before The Installation - Bosch FLEXIDOME IP starlight 8000i Series Installation Manual

20 en | Hardware installation
13. Install the conduit cover on the conduit plate with the bolt. Tighten the screw between
5.2

Installing the camera base

5.2.1

Before the installation

1.
2.
3.
2019.07 | 02 |
1.4 and 2 Nm (1 lbfft and 1.5 lbfft).
With the camera inside the box, remove the tapes from the sides of the camera base.
Remove the camera base from the box.
If the installation of the mounting plate was done with the conduit, remove the door on
the camera base as shown in the image. Keep the screw and lid.
Installation manual
FLEXIDOME IP starlight 8000i
Bosch Security Systems B.V.