Bosch FLEXIDOME IP starlight 8000i Series Installation Manual page 19

FLEXIDOME IP starlight 8000i
6.
7.
8.
9.
10. Drill the 4 holes with the appropriate diameter drill to support your 5-6 mm (0.2 in.)
11. Install 4 plugs in the holes.
12. Attach the mounting plate to the surface with 4 screws. Tighten the screws between 4
Bosch Security Systems B.V.
Put the cable through the hole of the conduit plate.
Attach the conduit plate with the conduit plate adapter to the surface with the washer
and a 5-6 mm (0.2 in.) screw. Tighten the screw between 2.5 and 4 Nm (1.8 lbfft and
3 lbfft).
Remove the mounting plate from the box.
Mark the positions of the holes on the surface. The mounting plate has only one side
available for the conduit. Make sure to position it accordingly.
screws and plugs.
and 7 Nm (3 and 5.2 lbfft).
Installation manual
Hardware installation | en
2019.07 | 02 |
19