Table of Contents
Advertisement
Long reach
Use the Long reach function to deliver strong air flow that quickly reaches a far distance .
Clean
Use the Clean function to remove moisture from the inside of the air conditioner for preventing propagation of fungi,
bacteria, etc .
MWR-SH11N_IB_EN_DB68-08072A-00.indd 13
Press the [ Long ] button to select the Long reach function .
• To cancel this function, press the [ Long ] button again .
• You cannot change the fan speed .
NOTE
• If the indoor unit is turned off or does not support the Long reach
function, the
indicator appears when you press the [ Long ] button .
Press and hold the [ Clean ] button for more than 3 seconds .
-
indicator will be displayed .
• Depending on the condition of the indoor unit, the Clean operation
stops after running for 30 seconds to 20 minutes .
NOTE
• To cancel this function, press the [ Clean ] button again .
• When the Clean function is set, the Timer LED on the indoor unit blinks
3times for 3 seconds . (OFF g ON g OFF g ON g OFF g ON g OFF g
Return to the previous state) . When the Clean function is cancelled, the
Timer LED on the indoor unit blinks once for 1 second . (OFF g ON g
OFF g Return to the previous state)
• If you turn on the air conditioner and then turn it off within 20 seconds,
the Clean function does not operate .
• When the air conditioner is turned off, the Clean function operates
immediately . When it is turned on, the Clean function operates after it
is stopped .
• Once the Clean function is started, it automatically continues to operate
until it is cancelled .
• When the Clean function is set,
controller display even when the air conditioner is turned off .
ENGLISH-13
is displayed on the wired remote
2018/10/16 19:41:47
Hide quick links:
Advertisement
Table of Contents
