Wind-Free Cooling - Samsung MWR-SH11N User Manual

Wind-Free Cooling

Use the Wind-Free Cooling function to enjoy mild cool breeze exuding from fine holes on the Wind-Free panel with the air
flow blade closed, instead of getting cool wind directly . The automated control of the temperature and fan speed according
to the indoor temperatures keeps your room cool and pleasant .
MWR-SH11N_IB_EN_DB68-08072A-00.indd 12
Press the [ Wind-free ] button to select the Wind-Free Cooling function .
• To cancel this function, press the [ Wind-free ] button again .
• If the Wind-Free Cooling function is cancelled, the air conditioner returns
NOTE
to the original fan speed .
• You can adjust the set temperature during the Wind-Free Cooling
function, and recommended set temperatures are 24 to 26
(75 to 79 ) . However, you cannot change the set temperature in the
°F
Fan mode .
• You can use the Wind-Free Cooling function when the Cool, Dry, or
Fan mode is running .
• If the room temperature goes high because of rise of external
temperature, heat from cooking, or other reason, operate the Wind-Free
Cooling function after operating in the Cool mode .
• If you select the Wind-Free Cooling function in the Fan mode, the
compressor stops working so that cool air does not come out .
However, mild breeze comes out and starts to clean the air in the room .
• During the Wind-Free Cooling operation, the cold air may be
intermittently weakened depending on the temperature and humidity
in the room . But the Wind-Free air currents are maintained and the
weakened cold air is immediately recovered, consequently keeping
the room comfortable . (During the Wind-Free Cooling operation, the
air flow blades may open to control the indoor air currents smoothly,
depending on the installation settings . In this case, as soon as the indoor
temperature and humidity change, the air flow blades are closed and
the Wind-Free Cooling operation restarts .
For more information on the installation settings, see "Setting the indoor
unit addresses and the installation options" in the installation manual of
the indoor unit . )
Change of the air flow blade by temperature and humidity
Low
Indoor
Breeze is blown via
temperature
the micro holes on
and humidity
the air flow blades
Air flow blade Closed
• When the Wind-Free Cooling function runs while sleeping, you may feel
cold air if the air conditioner is installed over the bed . In this case, set the
desired temperature higher than the normal setting temperature .
ENGLISH-12
°C
High
Breeze is blown via Breeze comes from the air
the micro holes on flow blade depending on
the air flow blades the setting
Opened
Closed (default)
(according to setting)
2018/10/16 19:41:45