X1401 Terminal Block - Detector Circuit 1; X1402 Terminal Block - Detector Circuit 2; Indicators; Reset Buttons - Siemens FCI2016-U1 Mounting & Installation

Periphery board (250p) FCI2016
1

Indicators

1.9.2 X1401 terminal block – detector circuit 1
1.9.3 X1402 terminal block – detector circuit 2
1.10 Indicators
LED Color
H1301 Yellow

1.11 Reset Buttons

1.11.1 S100 RESET periphery board

Button
S100
20 | 46
Building Technologies
Siemens Industry, Inc.
Pin Designation
1 2-
2 2+
3 1-
4 1+
Admissible cable cross-section: 1 x 12...18 AWG or 2 x 16...18 AWG
Pin Designation
1 2-
2 2+
3 1-
4 1+
Admissible cable cross-section: 1 x 12...18 AWG or 2 x 16...18 AWG
LED indicators on the FDnet/C-NET detector circuit
Condition
OFF
ON
1 x flash per second
2 x flash per second
1 x flash every 2 seconds
1 x flash per second and 2 x rapid
flash every 2 seconds
Function
Reset main microprocessor on
periphery board
Description
Return feed for circuit 1-2
Positive feed for circuit 1-2
Return feed for circuit 1-1
Positive feed for circuit 1-1
Description
Return feed for circuit 2-2
Positive feed for circuit 2-2
Return feed for circuit 2-1
Positive feed for circuit 2-1
Meaning
Normal condition
Startup problems on integrated circuit card 1
Fail-safe active (no communication to the PMI)
Fail-safe active and local alarm
Fail-safe active and signalization (local alarm)
Fail-safe active and local alarm and signalization
Position Meaning
Not pressed Normal
Pressed Resets only the main
microprocessor on the periphery
board.
A6V10315038_f_en_--
2016-02-25