Periphery board (500p) FCI2017
2
Configuration input power and battery
2.4 Configuration input power and battery
2.4.1 Wiring power supply input and battery
30 | 46
Building Technologies
Siemens Industry, Inc.
The periphery board has jumpers that are used to configure the system functions. The
jumper settings are described in the following sections.
Power supply 1 connection (170 W or 300 W)
Connection X301 must be used for a single power supply.
Jumper X305 must be plugged onto position 1-2.
BROO
PSSI
GND
+26V
Connection for power supply 2 (only 300 W)
Only one power supply (300 W) may be connected to X302.
A 2nd power supply (300 W) is only allowed in an housing (3HU).
Jumper X305 must be plugged onto position 2-3.
BROO
PSSI
GND
+26V
Battery connection
X303
BAT-
BAT+
X301
+
1
2
3
4
X302
+
1
2
3
4
-
2
+
1
A6V10315038_f_en_--
2016-02-25