Introduction; Purpose; Scope; Related Documents - Siemens BH17 7ER Installation Manual

Loop detector and cable terminations
Table of Contents

Advertisement

1.

INTRODUCTION

1.1

Purpose

This handbook is one of a series of General Traffic handbooks that cover
common aspects of planning, installation and commissioning of STC traffic
controllers and associated street equipment.
1.2

Scope

This handbook describes the procedures for the installation and
commissioning of slots, loop detectors, cabling of loops and cable
terminations.
1.3

Related Documents

1.3.1 Other STC Traffic Installation Handbooks

General Principles Installation Handbook
Installation Testing Handbook
Above Ground Detectors Handbook
ST4R Loop Detector Handbook
SLD4 Loop Detector Handbook
Helios Signals and Poles Handbook

1.3.2 Peek/Sarasota Detector Handbooks

The handbooks for the Peek/Sarasota detectors can be obtained from Peek
Ltd., Kingsworthy, Hampshire SO23 7QA.
These handbooks contain full details and should be consulted when installing
and operating Peek/Sarasota detectors.

1.3.3 Maintenance Provision for Peek/Sarasota Detectors

The manufacturer's MP documents for the relevant detector must be
consulted before any detector installation, commissioning or maintenance
work is carried out.

1.3.4 Siemens Self-Tune Detectors

667/1/27663/000 – Siemens ST4R Detector
667/1/45200/001 – Siemens SLD4 Detector
667/1/17180/etc - Note that these detectors are no longer available and the
handbook is only applicable where sites equipped with existing detectors are
to be maintained.
667/HE/20663/000
667/HE/20661/000
667/HE/20664/000
667/HE/20665/000
667/HB/27663/000
667/HB/45200/000
667/HB/30000/000
Issue 13
L
D
H
OOP
ETECTOR
ANDBOOK
Page 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents