Wiring; X1101 Relay Terminal Block; Detector Circuits, Circuit Driver 1 (Circuits 1 And 2) And Circuit Driver 2 (Circuits 3 And 4) - Siemens FCI2016-U1 Mounting & Installation

Periphery board (500p) FCI2017
2

Detector circuits, circuit driver 1 (circuits 1 and 2) and circuit driver 2 (circuits 3 and 4)

2.8.1 Wiring

2.8.2 X1101 Relay terminal block

2.9 Detector circuits, circuit driver 1 (circuits 1 and 2) and
38 | 46
Building Technologies
Siemens Industry, Inc.
C NC NO C NC NO
Alarm 1
Supervisory 7
C NC NO C NC NO
Pin Designation
1 C
2 NC
3 NO
4 C
5 NC
6 NO
7 C
8 NC
9 NO
10 C
11 NC
12 NO
Admissible cable cross-section: 1 x 12...18 AWG or 2 x 16...18 AWG
NO/NC (normally open / normally closed) relates to the fire detection system's normal
status.
circuit driver 2 (circuits 3 and 4)
The periphery board (500p) has two independent integrated circuit cards. Each
integrated card is a driver that has 2 circuits that can handle a maximum of 252
devices. Circuit driver 1 supports circuits 1 and 2 and circuit driver 2 supports circuits 3
and 4.
Each circuit driver can be configured for two style 6 circuits or four style 4 circuits:
The detector circuits are isolated from the periphery board's main circuit. Each circuit
card has a microprocessor which supervises ground fault, short-circuit, open circuit,
and line capacity.
6 Trouble
12 User
Description
Common contact common alarm relay
Normally closed contact common alarm relay
Normally open contact common alarm relay
Common contact common trouble relay
Normally closed contact common trouble relay
Normally open contact common trouble relay
Common contact common supervisory relay
Normally closed contact common supervisory relay
Normally open contact common supervisory relay
Common contact programmable relay
Normally closed contact programmable relay
Normally open contact programmable relay
A6V10315038_f_en_--
2016-02-25