Using The Recording Delay Function - Sony ICD-TX800 Help Manual

Help Guide
IC Recorder
ICD-TX800

Using the recording delay function

You can set your IC recorder to start recording automatically when the specified period of time expires.
Operate the remote control and follow the steps below:
While recording is on standby, operate the remote control to select "Recording Delay" on the OPTION
1
menu, and then press
Press or to select the desired period of time, and then press
2
You can select from "15sec" to "60min."
The countdown screen is displayed.
When the specified period of time expires, recording starts.
Note
During the countdown, OPTION, T-MARK,
During the countdown, if you turn the power off or the time period specified for the sleep timer expires, your IC recorder will turn
off.
During the countdown, your IC recorder does not turn off even when the period of time specified for the Auto Power Off function
expires.
Hint
To cancel the recording delay function setup process, press BACK/HOME during the countdown, press
"Yes", and then .
If you press REC during the countdown, the recording delay function is cancelled, and recording starts.
Related Topic
Using the sleep timer (Sleep Timer)
Setting the time period before the IC recorder automatically turns off (Auto Power Off)
.
, STOP,
4-699-323-32(1) Copyright 2017 Sony Corporation
.
, , and on the remote control are disabled.
61
or to select