Sony ICD-TX800 Help Manual page 84

The device registration (pairing) information is cleared in the following cases. You need to make device registration (pairing)
between the devices once again.
The settings on the IC recorder, the smartphone, or both devices are reset to the default settings, for example, due to
initialization.
The device registration (pairing) information is deleted, for example, during the course of a repair service.
Hint
If "ICD-TX800" is not displayed on the Bluetooth settings screen of the Android smartphone, select "Search for devices" at the
bottom of the screen.
On the "Bluetooth pairing request" screen of the Android smartphone, a message confirming the pass code appears. Select "Pair"
to proceed.
When you start REC Remote on the Android smartphone for the first time, the advanced device settings screen appears in step
7. To change the device name, select "Edit" and change the name, and then select "REGISTER."
The changed device name appears only within the REC Remote app on the Android smartphone. It does not appear on the OS
screen of the smartphone or on the display window of your IC recorder.
To make device registration (pairing) between the Android smartphone and the second or subsequent IC recorder and establish a
Bluetooth connection, tap the device name on the operation screen of REC Remote, and then repeat steps 3 through 7.
4-699-323-32(1) Copyright 2017 Sony Corporation
84