Sony ICD-TX800 Help Manual page 38

Help Guide
IC Recorder
ICD-TX800
Checking the operation indicator on the remote control
The operation indicator on the remote control either flashes or lights depending on the state of the remote control. The
following table lists the indications of the operation indicator and the states of the remote control.
Indication of the operation indicator
Flashes twice in blue (*).
Lights in blue (*) for 2 seconds.
Flashes four times in blue (*).
Stays lit in red.
Flashes alternately in blue and red.
Flashes twice in blue (*) repeatedly.
Flashes once in blue (*).
*
When the battery of the remote control is running out of power, the color of the operation indicator on the remote control turns from blue to red.
Note
While the operation indicator on the remote control flashes or lights, button operations on the remote control are not available.
When the operation indicator on the remote control lights in red, replace the battery of the remote control. When the indicator
flashes, wait until it turns off.
If the operation indicator on the remote control does not stop flashing, see
button on the remote control does not
Related Topic
Replacing the battery of the remote control
Turned on.
Turned off.
Resetting of the remote control is complete.
Not operable due to battery shortage.
Device registration process is in progress.
Wireless connection process is in progress.
Wireless connection is established and button operations are available.
work..
4-699-323-32(1) Copyright 2017 Sony Corporation
38
State of the remote control
The remote control does not turn on or pressing any