Help Guide | Recording A Few Seconds In Advance – The Pre Recording Function - Sony ICD-SX733 Help Manual

Help Guide
How to Use
Preparation
Recording
Playback
Editing
Menu
Computer
Software
Specifications
Announcements
Troubleshooting
List of Topics
IC Recorder
ICD-SX733/SX734/SX1000
Back Back to Top
Recording a few seconds in advance – the pre-
recording function
The pre-recording function allows you to record sound sources for approximately 5
seconds prior to the point when you press
recording during interviews or when making an open-air recording so that you will
not miss an opportunity to start recording.
A: Sounds for 5 seconds are buffered in the memory.
B: Press REC/PAUSE to enter the recording standby mode.
C: Press REC/PAUSE.
D: Recording starts.
1. In the stop mode, select MENU - the
The menu items will be different depending on the model you are using.
2. Press or to select "ON," and then press
"PRE REC" is set to "OFF" when you purchase the IC recorder.
3. Press STOP to exit the menu mode.
4. Select a folder.
5. Press and hold REC/PAUSE.
The IC recorder enters the recording standby mode.
Pre-recording starts and sounds for a maximum of the last 5 seconds are
buffered in the memory. (
memory.)
6. To start recording, press
The standby for recording mode is released, and recording continues from the
sound buffered in step 5.
REC/PAUSE. This is useful for
tab - "PRE REC," and then press
.
shows how long the sound is buffered in the
REC/PAUSE.
Search
Print
.
143