Dividing A File At All The Track Mark Points - Sony ICD-TX800 Help Manual

Help Guide
IC Recorder
ICD-TX800

Dividing a file at all the track mark points

You can divide a file at all the track mark points.
Operate the remote control and follow the steps below:
Operate the remote control to select the file that you want to divide.
1
While playback is on standby, select "Divide" - "At All Track Marks" from the OPTION menu, and then press
2
.
"Divide at All Track Marks?" appears on the display window.
Press or to select "Yes," and then press
3
"Please Wait" appears and the file will be divided at all the track mark points, deleting all the track marks. The
divided files will be suffixed with a sequential number ("_01," "_02," and so on).
A. Before dividing a file:
B. After erasing track marks: A file is divided at all the track mark points, and the divided files will be suffixed with a
sequential number ("_01," "_02," and so on).
Note
You cannot divide a protected file. To divide a protected file, remove the protection from the file first, then divide the file. For
instructions on removing protection, see
Track marks located near the beginning and end of the source file may not be used for dividing and remain in the divided files.
Hint
To cancel the dividing process, select "No" in step 3, and then press
Related Topic
Selecting a file
Dividing a file at the current playback point
indicates a track mark point.
Protecting a file.
4-699-323-32(1) Copyright 2017 Sony Corporation
.
.
105