Various Ways Of Recording; Starting Recording Automatically In Response To The Sound (Advanced Vor Function); Adding A Recording To A Previously Recorded Message; Response To The Sound (Advanced Vor Function) - Sony ICD-70 Operating Instructions Manual

z Various Ways of Recording
Starting Recording
Automatically in
Response to the Sound –
Advanced VOR function
When VOR (voice operated
recording) function is set to on,
recording starts when the recorder
detects sound and stops when no
sound is heard.
See the illustrations on pages 20
and 21 in the Japanese instruction
manual.
1
Press MENU to enter the
menu mode.
2
Turn the jog dial to display
"VOR OFF (or ON)", then
press the jog dial.
"OFF (or ON)" starts to flash.
3
Turn the jog dial to flash
"ON".
4
Press the jog dial.
The setting is completed.
5
Press MENU again to exit the
menu mode.
When you record messages with
VOR set to ON, the recording
pauses when no sound is detected,
"RecStandby" appears and "VOR"
flashes.
To cancel VOR
Follow the steps above and select
"OFF" in step 3.
10
Note
VOR function is affected by the
sound around you. Select the
microphone sensitivity according to
the situation(see page 17). If
recording is not satisfactory after you
have changed the microphone
sensitivity, set VOR to OFF.
Adding a Recording
to a Previously
Recorded Message
You can add a recording to the
message being played back.
The added recording will be
placed after the current message
and counted as a part of the
message.
See illustrations on page 22 in the
Japanese instruction manual.
During playback of Message 3
Message 4
Message 3
After adding
a recording
Message 3
Added recording
Meeting at 2 o'clock
on December 1
1
During playback, press REC
for more than 1 second.
"REC PLUS" is displayed and
the OPR indicator will light in
red.
Speak into the built-in
microphone.
Message 4
at Conference
room A