The Ic Recorder Is Not Detected By Sound Organizer - Sony ICD-TX800 Help Manual

Help Guide
IC Recorder
ICD-TX800

The IC recorder is not detected by Sound Organizer 2.

Check if the software is successfully installed, and then check the connections with your IC recorder as follows:
When you are using a USB hub, remove the hub and connect the IC recorder directly to a USB port on the
computer directly with the supplied USB cable.
Disconnect the supplied USB cable from the USB/Headphone connector on the IC recorder and connect it back
again.
Try connecting the supplied USB cable to another USB port on the computer.
The computer may be placed in sleep/hibernate mode.
Change the power saving mode settings to keep the computer in normal mode.
Save a backup copy of all of the data stored on the built-in memory of your IC recorder to the computer, and then
format the built-in memory of the IC recorder.
Related Topic
Formatting the memory (Format)
4-699-323-32(1) Copyright 2017 Sony Corporation
199